March LC-5C-MD 230v Replacement KoolAir SPM1000-230 Marine Air Conditioning Pump

Description

ETL Listed Recognized Component (Intertek)
ISO 8846 Marine Ignition Protected
THIS PUMP IS 230 VOLT ONLY
Perfect economical replacement for March LC-5C-MD Pump 230volt model Air Conditioning Pump.
100% SATISFACTION
GUARANTEED
FREE SHIPPING!
KOOLAIR PUMP Replaces MARCH L
C-5C-MD
Pump - DROP IN PLACE for all March
LC-5C-MD
AC Coolant Pumps - Comes with Standard & Upgraded Marine Base
Economical March Pump "Drop In Replacement" Option - Save $ Today!
THIS PUMP IS 230 VOLT ONLY
LC-5C-MD March Pump Replacement
THIS IS THE ONLY MARINE AC COOLANT PUMP THAT HAS RUN DRY CAPABILITY!
Product Information
-
If the Pump is applied correctly, it will be the LAST one you ever purchase!
1000 GPH
1″ FPT Inlet, 1/2″ MPT Outlet
27 Feet of Head @ 11.7 PSI
230 Volt
1/8 HP
MODEL:
S
PM1000-230
To withstand thermal overloads without failure, the pump has run dry protection. Finally when cooled, the pump will resume operating normally.
Polypropylene, Buna N and Ceramic Magnet make up the wet end materials exposed to liquids. When submerged, Epoxy, Stainless Steel, Polysulfone, and also the Cord will come in contact with the solution.
The inlet connection is a ¾” female pipe thread and the outlet is ½” male pipe thread.
Includes fully integrated, heavy duty marine base and also the original base in contrast to other pumps.
The motor is a 1 Phase 230V, 1/8 Horsepower motor, running on either 50 or 60 HZ. The pump is not self-priming and requires flooded suction.
Maximum internal pressure is 25 PSI and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius.
The magnetically driven SPM1000-230 volt pump with no shaft seal is our core model. In open air or furthermore, fully submerged, the SPM  pumps as a result offer complete moisture protection due to being epoxy coated. When re-assembling the pump for service also make sure all “O” Rings are properly seated.
ISO 8846 Marine Ignition Protection.
NMMA, USCG and SAE J1171:2016
OPERATION:
The pump is not self-priming, and requires a flooded suction.
The pump has run dry and thermal overload protection. In a run dry situation the pump will shut down.
Simply let it cool down or hose it down to assist the cooling.
INTERTEK ETL LISTING
The ETL Listed Mark indicates to distributors, retailers and customers that your product has been tested by Intertek and found in compliance with accepted national standards.
What is the difference between the ETL Listed Mark and those issued by our competitors?
Certification marks – like the ETL Listed Mark – demonstrate compliance to the requirements of widely accepted product safety standards, as determined through independent testing and periodic follow-up inspections by an NRTL. It is the quality of customer service and of the capabilities provided by the testing laboratory issuing each certification mark that sets them apart.
Approximate
Shipping Weight: 12 lbs
Voltage: 230